BG-778（DPU301）Emergency two-component polyurethane foaming agent

BG778 (DPU-301) is an emergency two-component hydrophobic polyurethane grouting material,

which immediately reacts with water，expands in volume and produces an insoluble foaming body

which can not only prevent water leakage, but also has reinforcement effect. Widely used in subway

tunnels, water conservancy and hydropower, underground garage, sewers and other waterproof and 

plugging reinforcement engineering fields.

1.Product characteristics

 Curing fast, rapid reaction with water, foaming, curing, reaction time can be adjusted according to the amount of A components, generally controllable curing in tens of seconds to a few minutes;

 Has good hydrophobic property, chemical stability;

 High strength, when foaming under closed condition, the compressive strength can reach more than 20 MPa within a few hours;

 Has a large permeability radius and solidification volume ratio, chemical reaction occurs rapidly in water, and great expansion pressure will be Produced at the same time, push the slurry to the depths of the crack to form a tough solid.

2. Scope of application

 Water tank, water tower, basement, bomb shelter and other buildings to plug leakage and waterproof and anti-corrosive coating;

 Corrosion protection of metal and concrete pipes and steel structures; llUnderground,tunnel,building,foundation,reinforcement,and,ground,dustprooftreatment

 Leakage plugging and reinforcement of deformation joints, construction joints and structural cracks in construction projects;

 Port, wharf, pier, dam, hydropower station curtain grouting plugging andreinforcement;

 Wall plugging in geological drilling, selective water plugging in oil mining and water stop in mine.

3.Packaging, storage and transport

 Products stored in clean, dry, sealed iron drums, volume of 20 kgs / barrels, 10kgs/ barrels;

 Transport should prevent rain, exposure, extrusion, collision, to ensure that the packaging is intact;

 Products should be stored in a ventilated, dry, cool place to prevent direct sunlight exposure to avoid rain. Storage temperature should not exceed 40℃;

 Under normal storage conditions, the shelf life is 6months.

4.Typical performance indicators

5. Reaction time

The reaction time depends not only on the rock temperature, but also on the temperature of the product. If the reaction time under different catalyst dosage is measured under laboratory conditions, it is best to carry out field experiments before grouting